简体中文版 EnglishWelcome to our website !

带式压滤机-Belt pressure filter

Hits:198
Time:2018-12-10 20:27:54

流程简介:

把不同的物料(浓度、温度、叩解度、配料成份)通过特制的放料箱均匀布置有重力脱水区的滤网上脱除游离态水,后进入“楔”型脱水区,使物料受下上、下网的轻度挤压,继续脱除物料中的游离水,使物料完全失去流动性,纤维间的拉力大大增加,物料的浓度已达到6-10%,再进入回旋(幅度可调)脱水区,脱除物料中的游离水及化合水,该脱水区使物料的浓度达到10-14%,然后进入压榨脱水区进行强制脱除物料中的化合水及细胞内水,使物料的浓度达到30%以上,通过卸料刮刀将物料饼刮落到下一工序(如物料中含有汽体,整机设置封闭气罩,把汽体引出)

Process introduction:
Different materials (concentration, temperature, tapping degree, ingredients) are evenly arranged in a special feeding box on a filter screen with gravity dehydration zone to remove free water, and then enter a "wedge" type dehydration zone, so that the material is subjected to mild extrusion of the upper and lower nets, and the free water in the material is continuously removed, so that the material completely loses its flow. The tension between fibers increases greatly, and the concentration of the material reaches 6-10%. Then it enters the cyclotron (adjustable range) dehydration zone to remove free and combined water from the material. The dehydration zone makes the concentration of the material reach 10-14%. Then it enters the pressing dehydration zone to force the removal of combined water and  intracellular water from the material. So that the concentration of materials to more than 30%, through the discharge scraper to scrape material cake to the next process (such as material containing steam, the whole machine set up a closed hood, the steam out).

设备特点:

1、扩散洗涤 2、高浓提取

3、结构合理 4、占地面积小

5、操作简便 6、节能节水

7、压缩储运 8、浆料无流失

Equipment features:
 
1, Diffusion washing 2, High concentration extraction.
 
3, Reasonable structure 4, Small footprint.
 
5. Easy operation 6. Energy saving and water saving.
 
7, Compressed storage and transportation 8, No loss of pulp.
Contact Us
Telephone:86-536-6066260 6065123

Mobile13806496777

Fax:86-536-6065719

Email:zengyishebei@163.com

Address:NO. 9 Waimao street, Zhucheng, Shandong, China