简体中文版 EnglishWelcome to our website !

double cone high concentration slag remover

Number:015
Hits:50
Time:2018-07-05 10:06:09
    
  Double cone high consistency slag remover is an advanced equipment for pulp purification. It uses different proportion of fibers and impurities to separate heavy impurities from pulp, so as to purify pulp. The equipment has a wide range of applications. It can be used not only for the roughing and purification of high energy pulp, but also for the cleaning and purification of low consistency pulp in front of the paper machine. It can be used not only in the production of chemical pulp and semi-chemical pulp, but also in the production of mechanical pulp waste pulp. It is widely used in the production of box board, corrugated paper, cultural paper, newsprint and toilet paper, especially in the purification of waste pulp and semi-chemical straw pulp.
 
  Double-cone high concentration slag remover has simple structure, small occupation area, large production capacity, easy operation, no blockage of slag outlet, high purification efficiency, pulp only once through the desander, no tail pulp treatment equipment, zero fiber loss, wear-resistant cone, long service life, no transmission. The slag removal effect can be achieved in the process with no power to install in pulp transportation.
 
  The double cone high concentration slag remover does not need special maintenance. In production, the slag removal effect can be guaranteed as long as the valves are flexible, no leakage, and the pressure is stable and normal everywhere. During the overhaul, the surface wear of the upper cone should be checked at any time, and the upper cone should be replaced if necessary.

      双锥高浓除渣机是纸浆净化的先进设备,它利用纤维与杂质比重不同而使重杂质从纸浆中分离出来,达到净化纸浆的目的。该设备使用范围广,既可用于高能度纸浆的粗选净化,亦可用于纸机前对低浓纸浆进行精选净化。既可用于化学浆、半化学浆的生产,又可用于机械浆废纸浆的生产,广泛应用于箱板纸、瓦楞纸、文化纸、新闻纸、卫生纸的生产中,尤其是净化废纸浆、半化学法草浆效果更佳。

      双锥高浓除渣机结构简单,占地面积小,生产能力大,操作方便,不堵塞排渣口,净化效率高,浆料仅一次通过除砂器,不需尾浆处理设备,纤维流失为零,锥体耐磨,使用寿命长,没有传动,不需要动力将其安装在浆料输送过程中,即可达到除渣效果。


      双锥高浓除渣机不需特殊维护,生产中只要保证各阀门动作灵活,不漏水,各处压力稳定、正常,即可保证除渣效果。在检修时应随时检查上锥体内表面的磨损情况,必要时更换上锥体。

 

Model

ZSC31

ZSC32

ZSC33

ZSC34

ZSC35

ZSC36

ZSC40

Output capacity t/d

10-20

20-30

30-45

45-60

60-75

75-100

150-200

Throughput m3/min

0.8-0.9

1-1.2

1.3-1.5

1.5-2.0

2.0-2.5

2.5-3.0

5.0-6.0

Inlet pipe diameter mm

 Φ150

Φ175

Φ200

Φ225

Φ250

Φ250

Φ400

Outlet pipe diameter mm

Φ80

Φ100

Φ125

Φ150

Φ150

Φ175

Φ250


Contact Us
Telephone:86-536-6066260 6065123

Mobile86-15098172221

Fax:86-536-6065719

Email:zengyishebei@163.com zengyimachinery@outlook.com

Address:NO. 9 Waimao street, Zhucheng, Shandong, China